|
| |
Welcome to the Irrigation Design Software Page
The 2009 version of our design software has been
released. This next generation software will assist the
professional irrigation designer in every phase of the design process. It
starts from the establishment of the "Watering Window" and takes you all the way
through to the "Hydraulic Calculation" process. The latest version will
perform all of the calculations automatically, including the complete generation
of an ET based irrigation schedule which will comply with your watering window!!
The software will provide the solutions sets automatically for
the following venues:
Watering Window
 |
Establishes maximum safe flow from your water
meter utilizing the two generally accepted methods (75% or 10% rule)
|
|
Determine the "Adjusted Dynamic" pressure
|
|
Determine the maximum available GPM and Time
available for the defined watering window
|
|
Determines the ET (Evapo -Transpiration Rate)
rate for the specific city
|
|
Determines the maximum GPM availability
of any given size meter based on static pressure provided
|
Head Spacing
|
Assists in determining the correct micro-climate
-(Software has seven standard, and five
user defined micro-climates)
|
|
Determines the absolute most efficient head spacing for
Spray, Rotors, Rotators, or Drip irrigation for any area based on water cost and/ or
water efficiency down to the nearest inch!
|
|
The software will automatically select the
product radius' that is the most efficient for the given area and a given
product.
|
Design Page
|
Will provide that actual spacing (Head
Spacing and Row Spacing) for each area and each micro-climate
|
|
Will provide the total number of heads needed
in each area
|
Zoning
|
Will automatically determine the maximum
number of zones needed based on your area layouts, the meter size, and static
pressure
|
|
Allows you to zone based of the
pre-determined micro-climates
|
|
Keeps a running tally of all zones, gallons,
and micro-climates
|
|
Will tell you when to keep adding heads to a
zone as well as to when you should stop adding heads
|
Hydraulics
|
Will completely calculate an "Actual Head
Pressure" calculation on the worst case scenario.
|
|
Software will determine the worst case zone
automatically or the user can select it
|
|
Will calculate and display any piping that
exceeds 5 linear feet per second with a warning
|
|
Will include any elevation deviations in the
hydraulic calculations
|
|
Will provide and absolute "Yes" or "No" if
the zone meets the "Actual Head Pressure" and the "Design Pressure"
|
ET Scheduling
|
Will automatically generate an ET based
schedule for the City you are in
|
|
Will use either computer generated ET values
or allow for user input values
|
|
Will automatically adjust for each month
|
|
Will automatically adjust the schedule to
address violation of watering windows
|
|
Will automatically compress or expand the
schedules to comply with watering windows
|
|
Will automatically calculate precipitation
rate for each zone based on the actual design parameters not theory values
|
|
Will allow for adjustment factors to comply
with city ordinances
|
|
Provides all data for both conventional and
drip zones
|
Water Rate
|
Will calculate the actual tier pricing for
water for any given municipality with basic user data input
|
|
Will calculate the actual tier pricing for
sewage for any given municipality with basic user data input
|
|
Will calculate the actual tier pricing for
irrigation only for any given municipality with basic user data input
|
|
Will calculate the actual cost per gallon for
water, sewage, and irrigation only
|
Water Costing
|
Will automatically calculate the total
gallons and cost incurred of each zone of irrigation on a daily and monthly
basis
|
|
Will provide worst case scenario operating
cost for the highest ET month for the system that is designed
|
Bidding and Estimating
|
Will provide a complete material costing of
all components of the irrigation system
|
|
Will provide a complete inventory of the
materials required
|
|
Will calculate time and motion values for
labor
|
|
Will calculate overhead items
|
|
Will calculate the final price on multiple
formats that are user selected
|
Reference Calculations
|
Provides many industry standard calculations
that are used in the irrigation industry
|
PRICE - $295.00
Call the office to order your
copy today!
|
